Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Heavy Duty Pellet Retainer ToolHeavy Duty Pellet Retainer Tool A dedicated pellet retainer tool for needle air fill damper systems. It lets you snug the rubber pellet gently during pressurization so the port stays sealed long enough to remove the needle cleanly. This is mainly useful on shocks that tend to leak during fill or right after needle removal, especially at high damper pressures (often 250+ psi). Important note (not included) This product is the pellet retainer tool only.

Float X2 Inner Air Can Clamp (All Years)

What's Included 3-in-1 GRIP Shaft Clamp 10mm Shaft Clamp (damper + air shaft)

IFP removal tip Use a compressor on the bleed port (after draining oil)

Custom wrench to drive the adjuster pin sockets

References & Guides Fox GRIP X (2025) Service Manual

This is a twin-tube damper with no piggyback reservoir

If the shock sucks down

Schrader valve core tool

damper tube or rebound adjuster

If the fit feels too tight or too loose:

misalignment can crack the tool

The clamp set is included two times for the travel you select