GPS/RTC Expansion Board for Raspberry Pi

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

GPS/RTC Expansion Board for Raspberry PiAvailable from our resellers in your region: The Uputronics GPS RTC Expansion Board for Raspberry Pi provides a modern multi GNSS GPS receiver and hardware RTC with quick no soldering required connection to all Raspberry Pi boards with the 2x20 header (the original Pi Model A B are not supported). Featuring PPS (Pulse per second) output to permit the use of the board for PPS disciplined NTP servers, RAW output available from the UBlox GPS module and

The end user of these modules will need to submit their final product to get CE certification

RAW output available from the UBlox™ GPS module and twin super caps for GPS hot start/setting retention & maintaining RTC

Ship Plotter and any other software that accepts serial data input

1 x 2 meter RJ45 Patch Cable

UHF and microwave converters

975 MHz) and B (162

The board allows you to select the module on either CE0 or CE1 depending on the location of the switch

This format is understood by applications and devices like chart plotters

Rise/fall time of output signal at 10MHz is 300ps/260ps measured between 10% and 90% levels

Timing Performance

A special feature of this unit is the 200 ohm internal load which provides a current drain for the GPS receivers not powering the active antenna

However if you don't have access to a 3D Printer we can supply one