Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Pressure Switch Merrill 30/50See Shipping Page* Pressure Switch Merrill 30 50 Use: Submersible or Jet Pump 115v or 230v Pressure Settings: Factory Set at 30 50 Can be easily adjusted to 40 60 20 40 or any other setting. Has separate differential adjustment to raise or lower cut out pressure without changing cut in pressure. Important: Air Charge in pressure tank should be set to 2 4 PSI below cut in pressure of switch to achieve maximum drawdown of tank and avoid short cycling of

Height: 13

It features a chlorine resistant 100% butyl diaphragm with a precision molded copolymer polypropylene lower water chamber for superior air and water separation

• Filter element flushes completely clean in less than 20 seconds

3/4"x1/2" 100PSI

Tank Material: Stainless Steel

Always check the air charge in the tank with a tire pressure gauge with the pump off and water pressure drained from the lines

Max Working Pressure: 125 PSI

If the torque arrestor isn't tight against the casing it won't work effectively

Length: 29" (From bottom of the motor to top of outlet)

Model T2C-150(1-1/2" Models) - 7

1/4" FEMALE PIPE THREAD

Used for advanced programming of the Grundfos CU301 and other Grundfos pumps including the MAGNA & MAGNA3 lines

Exchange/Return Notes