Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Rigging Rope Wrench 120kgThe RP292 Rigging Rope Wrench is a lowering device suitable for loads ranging from 20 to 120kg (44 264lbs). The RP292 is fitted with a one way locking wheel, which provides additional friction when lowering, allowing increased control of heavier loads. During lifting, the wheel runs freely. Technical Information Rope diameter range (mm) 12 13mm (1 2") (WLL) Working Load Limit (kg) 20 120 (WLL) Working Load Limit (lbs) 44 264 (MBS) Minimum Breaking

Offering a variety of uses from an Anchor sling

When assembled on a Lanyard it is designed as a work positioning device or restraint used in conjunction with an approved climbing system or as a standalone work positioning or restraint device

These options give you a much greater balance of efficiency and comfort when advancing your system

and history of over fifty knots commonly used in tree work

the wheel runs freely

These Low Friction Rings are spliced in to STEIN OMEGA Rigging line which have a 32-plait polyester sheath which offers a high resistant’s to abrasion and combined with a braided high tenacity core provides for a tough but high strength lowering line

Kit Contains the following items:

This fixed-axle ropegrab is certified to EN353-2

Meanwhile EN 12492 is the safety standard that describes the safety requirements and test methods for climbing helmets intended for mountain climbers which is required in the Arboricultural Industry or Working at Height

Large semi-rigid leg loops for comfort

Improved “Knots for Climbing and Rigging” section

lightweight hearing protection

Exchange/Return Notes